weldstar rt wheels on S197 Mustang

[ramaxon1]

What is the maximum wheel width that will fit the front end of a stock 2006 Mustang GT in the Weldstar RT series?

Also, will these clear the large diameter stock TRW caliper piston housings?

It looks like only a 4" will fit up front due to the tie rod ends and the caliper distance exceeding a 15" diameter from the hub center.

Thanks,

Rich

[srider]

Rich,

Just the 15x4 RT Series fits the front of the stock GT, anything wider just won't fit around the caliper. The rear is good with a 15x10 at 7.5" backspace.

I'm not familiar with the TRW your are referring to. Is that the GT500 set up?

Thanks,
Scott

[ramaxon1]

Rich,

Just the 15x4 RT Series fits the front of the stock GT, anything wider just won't fit around the caliper. The rear is good with a 15x10 at 7.5" backspace.

I'm not familiar with the TRW your are referring to. Is that the GT500 set up?

Thanks,
Scott
Scott,

Thanks for the reply. I am going with 15x8's rear and 15x4's front.

The 'TRW' reference was regarding OEM of the stock GT calipers.