weld alumistar 15" single bead lock

[godlike]

i have a set of alumistar 15" single bead locking 5 star rims when i got them the center section bolts were loose , i saw on the site the torque specs were 20 ft pounds with a lil lock tight is this correct? i had to use multiple extensions so i went to 22 ft lbs to make up for the loss of torque due to multiple extensions i hope it will be fine..

Also i would like to know the torque specs for the bead lock bolts and wheel lugs i just dont know the specs on the studs what is a midway point or average torque spec for lugs if there is one

another question is this is a 2300 hp 10.5 outlaw 25.2 6 second certified trans am will the single beadlocks be enough we have the beadlock on one side and screws on the inner dont know what the torque is yet.

Thanks

[godlike]

please could i get a response the car is sitting on a roll cart suspension is ready to go in i just need the torque specs for the center section of the rim the bolts are i believe 3/8 fine thread with a 1/2 inch head there are 15 of them per rim i just need to get it rolling so i can go have the chassis set up , also need the torque specs for the bead lock bolts

Please and thank you

[Weld 3]

i have a set of alumistar 15" single bead locking 5 star rims when i got them the center section bolts were loose , i saw on the site the torque specs were 20 ft pounds with a lil lock tight is this correct? i had to use multiple extensions so i went to 22 ft lbs to make up for the loss of torque due to multiple extensions i hope it will be fine..

Also i would like to know the torque specs for the bead lock bolts and wheel lugs i just dont know the specs on the studs what is a midway point or average torque spec for lugs if there is one

another question is this is a 2300 hp 10.5 outlaw 25.2 6 second certified trans am will the single beadlocks be enough we have the beadlock on one side and screws on the inner dont know what the torque is yet.

Thanks

Torque specs for the centers is 20 ft. lbs with a drop of red loctite. Torque the rings to 22 ft lbs.