16x10" barrels

[Loki]

I need 10" wide rims and 16" high for Mercedes G.
Bolt pattern is 5x130mm and center bore is 84,1 mm
Rim must be hub centric.
ET would be close to zero

1.
Can you build this rim and what would be the cost pr.rim
a. for a batch of 5 rims?
b. for a batch of 50 rims?

2.
Can I buy 16" high and 10" wide barrels with bolt ring close to the middle of the rim? (I would then have to make my own centers)

Loki

[Weld 3]

I need 10" wide rims and 16" high for Mercedes G.
Bolt pattern is 5x130mm and center bore is 84,1 mm
Rim must be hub centric.
ET would be close to zero

1.
Can you build this rim and what would be the cost pr.rim
a. for a batch of 5 rims?
b. for a batch of 50 rims?

2.
Can I buy 16" high and 10" wide barrels with bolt ring close to the middle of the rim? (I would then have to make my own centers)

Loki

Sorry we do not make wheels for this application. We also not not make 16 inch barrels.

[Loki]

Sorry we do not make wheels for this application. We also not not make 16 inch barrels.


Thx for your fast reply.
Do you have any suggestion where I can find a rim in this rare format?

[Weld 3]

Thx for your fast reply.
Do you have any suggestion where I can find a rim in this rare format?

No I do not. Most companys will only produce whole wheels. I have never seen any wheel company that sells components so you can assemble the wheel yourself.